[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[gentoojp-users 65] Compaq DP2000 5166MMX ¤ÇKernel panic

お初にお目にかかります。
Ryoske@xxxxx初心者です。

Compaq DP2000 5166MMXというマシンを使っているのですが、
インストール作業を終えて、起動するとKernel panicが発生します。

Freeing unused kernel memory: 96k freed
Warning: unable to open an initial console.
Kernel panic: No init found. Try passing init= option to kernel.

こんな感じのメッセージを残してキーボードのCaps LockとScroll Lock
のランプがチカチカと点滅します。
この時点でログを取る方法がわからなかったので、目でみて写しました。
追加したハードウェアはRealTek RTL-8029が載ったPCIのEthernetのカードと、
128MBのDIMMだけです。

Live CDで立ち上げたときのdmesgは以下の通りです。

--------------------------------------------------------------

Linux version 2.4.19-xfs-r1 (root@xxxxxxxxxxxxxxxxxxx) (gcc version 3.2) #1 SMP Sat Sep 14 17:15:33 Local time zone must be set--see zic 
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
128MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone(1): 28672 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=linux initrd=initrd root=/dev/ram0 init=/linuxrc noacpi 
No local APIC present or hardware disabled
Initializing CPU#0
Detected 166.404 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 331.77 BogoMIPS
Memory: 124128k/131072k available (2722k kernel code, 6556k reserved, 995k data, 552k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 008001bf 00000000 00000000, vendor = 0
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After vendor init, caps: 008001bf 00000000 00000000 00000000
CPU:     After generic, caps: 008001bf 00000000 00000000 00000000
CPU:             Common caps: 008001bf 00000000 00000000 00000000
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: none
CPU: Before vendor init, caps: 008001bf 00000000 00000000, vendor = 0
CPU: After vendor init, caps: 008001bf 00000000 00000000 00000000
CPU:     After generic, caps: 008001bf 00000000 00000000 00000000
CPU:             Common caps: 008001bf 00000000 00000000 00000000
CPU0: Intel Pentium MMX stepping 04
per-CPU timeslice cutoff: 159.89 usecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xf1764, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/0586] at 00:07.0
Activating ISA DMA hang workarounds.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12a (20020514) Richard Gooch (rgooch@xxxxxxxxxxxxx)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c586b (rev 31) IDE UDMA33 controller on pci00:07.1
    ide0: BM-DMA at 0x1420-0x1427, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1428-0x142f, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DJAA-31700, ATA DISK drive
hdb: Conner Peripherals 1275MB - CFS1275A, ATA DISK drive
hdc: CD-532E-B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 3334464 sectors (1707 MB) w/96KiB Cache, CHS=827/64/63, DMA
hdb: 2496876 sectors (1278 MB) w/64KiB Cache, CHS=619/64/63, DMA
hdc: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
 /dev/ide/host0/bus0/target1/lun0: p1
0 3c515 cards found.
smc-ultra.c: No ISAPnP cards found, trying standard ones...
cs89x0:cs89x0_probe(0x0)
PP_addr=0xffff
eth0: incorrect signature 0xffff
PP_addr=0xffff
eth0: incorrect signature 0xffff
PP_addr=0xffff
eth0: incorrect signature 0xffff
PP_addr=0xffff
eth0: incorrect signature 0xffff
PP_addr=0xffff
eth0: incorrect signature 0xffff
PP_addr=0xffff
eth0: incorrect signature 0xffff
PP_addr=0xffff
eth0: incorrect signature 0xffff
PP_addr=0xffff
eth0: incorrect signature 0xffff
PP_addr=0xffff
eth0: incorrect signature 0xffff
PP_addr=0xffff
eth0: incorrect signature 0xffff
PP_addr=0xffff
eth0: incorrect signature 0xffff
PP_addr=0xffff
eth0: incorrect signature 0xffff
cs89x0: no cs8900 or cs8920 detected.  Be sure to disable PnP with SETUP
eth0: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
eth1: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
eth2: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
eth3: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
eth4: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
eth5: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
eth6: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
eth7: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
FW Version=$Version$
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
  http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 11 for device 00:04.0
eth0: RealTek RTL-8029 found at 0x1400, IRQ 11, 00:00:E8:D8:3D:B5.
pcnet32.c:v1.27a 10.02.2002 tsbogend@xxxxxxxxxxxxxxxx
ThunderLAN driver v1.15
TLAN: 0 devices installed, PCI: 0  EISA: 0
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
atp.c:v1.09 8/9/2000 Donald Becker <becker@xxxxxxxxx>
  http://www.scyld.com/network/atp.html
SCSI subsystem driver Revision: 1.00
sim710: No NCR53C710 adapter found.
Loading Adaptec I2O RAID: Version 2.4 Build 5
Detecting Adaptec I2O RAID controllers...
Red Hat/Adaptec aacraid driver, Sep 14 2002
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0-ac
Failed initialization of WD-7000 SCSI card!
DC390: 0 adapters found
megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001)
megaraid: no BIOS enabled.
aec671x_detect: 
3ware Storage Controller device driver for Linux v1.02.00.025.
3w-xxxx: No cards with valid units found.
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 17:17:18 Sep 14 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0x1440, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
evms: md raid5: measuring checksumming speed
evms: md raid5:    8regs     :   182.800 MB/sec
evms: md raid5:    32regs    :   145.600 MB/sec
evms: md raid5:    pII_mmx   :   252.000 MB/sec
evms: md raid5:    p5_mmx    :   305.600 MB/sec
evms: md raid5: using function: p5_mmx (305.600 MB/sec)
evms: EVMS v1.1.0 initializing .... info level(5).
evms: Exporting EVMS Volume(117,1) from "/dev/evms/hda1".
evms: Exporting EVMS Volume(117,2) from "/dev/evms/hda2".
evms: Exporting EVMS Volume(117,3) from "/dev/evms/hda3".
evms: Exporting EVMS Volume(117,4) from "/dev/evms/hda4".
evms: Exporting EVMS Volume(117,5) from "/dev/evms/hdb1".
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 403k freed
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 552k freed
Compaq CISS Driver (v 2.4.5)
Compaq SMART2 Driver (v 2.4.21)
Unable to handle kernel paging request at virtual address 8881aa40
 printing eip:
8030a7f2
*pde = 0117d067
*pte = 00000000
Oops: 0002
CPU:    0
EIP:    0010:[<8030a7f2>]    Not tainted
EFLAGS: 00010282
eax: 8881aa40   ebx: ffffffea   ecx: 00000001   edx: 00000001
esi: 888179c0   edi: 00000000   ebp: 88813000   esp: 87849f08
ds: 0018   es: 0018   ss: 0018
Process insmod (pid: 43, stackpage=87849000)
Stack: ffffffea 00000000 00000000 88813e35 888179c0 88816f00 ffffffea 88813595 
       8011e26b 00000000 080fc8f0 000049e8 00000060 00000060 00000008 87b5bde0 
       877ed000 877ee000 00000060 80446a00 88813060 00004a24 00000000 00000000 
Call Trace:    [<88813e35>] [<888179c0>] [<88816f00>] [<88813595>] [<8011e26b>]
  [<88813060>] [<80109283>]

Code: 89 30 8b 1d 48 9b 47 80 31 ff 81 fb 48 9b 47 80 89 35 54 9b 
 <7>ISO 9660 Extensions: RRIP_1991A


カーネルはvanilla-sourcesを用いてます。
Gentoo-sourcesでも同じ症状がでました。
何がガンなのか、よくわからない状態です。

よろしくお願いします。

ここを読め、といったポインタがあったらご教授くださいませ。

以上長々とすみませんでした。

#.configはちと大きかったので、必要があれば後ほど投げます。

Ryoske
http://karma.dip.jp/